Installation Instructions

When tepePAN Roof sheets are applied to carrier profiles, the long edges of the standard size sheets should be placed at a 90° angle to the carrier profiles on the horizontal axis. A 5 mm joint gap should be left between the sheets; the edges of each sheet should be screwed so that they fit into the carriers. The axis spacing of the profiles in the carrier system should be between 600 and 625 mm and this distance should not be exceeded. It is necessary to work on the screwing line during application. Sheets that are not fixed to the carrier should never be stepped on.

Advantages of Use

• It can be used as a finishing layer compatible with paint, surface coating and wallpapers.
• It offers high impact resistance compared to gypsum-based sheets.
• It can be used as the underlayer of interior and exterior facade coatings.
• It can serve as an under-coating board in floor and roof applications.
• It is suitable as a ceramic underlay board in wet areas.
• It can be easily mounted, cut and shaped.
• It is practical to carry with its lightweight structure.
• It provides protection against different weather conditions.
• It supports heat and sound insulation.
• Resistant to seasonal temperature changes.
• Resistant to sunlight.
• Resistant to water and humidity.
• Highly resistant to impacts.
• Does not contain asbestos; environmentally friendly.
• Does not smell, does not emit harmful gases.
• Does not cause mold, insect infestation or rot.